 |
 |
 |
 |
 |
 |
 |
 |
| |||||||||
|
|
|
How to reset the console server back to its factory default A hard reset will reset the console server back to the factory default settings. The IP address will reset to 192.168.0.1. All custom settings (users, hosts, alerts) will be erased and any custom scripts will be deleted. To perform a hard reset, use a ball-point pen to depress the recessed Erase button:
The desktop SD/CM400x and IMG4004-5 units have the front panel port LEDs will flash in a cyclic pattern during normal operations when the serial ports are all idle. Alternately if theres serial port activity on any port on the units then the front panel LEDs will display that serial port activity. The instant these units are hard reset this flash pattern stops i.e. the LEDs cease to glow. After a few seconds the LEDs recommence cycling indicating the unit has successfully reset and is back in its factory default state. To factory reset from the command line type the command flatfsd -i You can also soft reset the console server so it reboots but retains all its settings from the Management Console or the command line (refer faq 252). |
| © Opengear 2010| Privacy Policy |